Typical Dial Up Error Codes and Their Solutions
By Andrew Seaman
Using a dial up Internet can be a difficult job if you are unfamiliar with the setup process, status codes and various other bits that can be confusing. To simplify things, and to help guide you through the installation and troubleshooting of a dial up system, we have put together a typical list of error codes and dial up issues that can be resolved with the right know-how.
View below for a complete list of common error codes and their meanings.
Frequently dial error
For example, you want to connect through a multi NetDSL or cable connection and get an error message? Often the cause is the configuration of the dial-up connection. Here is a list of selected error messages and their probable causes.
You will find an extensive list of installation instructions.
We suggest that before changes always perform a backup. Your computer should be organized in a local network, contact your network administrator before changing your network settings.
Dial-Up Error Codes
602 The port is already open
Please start with this error, first to your computer. If the error persists, check that your computer performs automatically each time a dial-up. This can be below the point Startup ‘under’ Start ‘and related programs. ” Delete where appropriate, this entry. If this is not successful, please check your computer for viruses, Trojans and dialers.
621-625 error in the phone book file or in the phone book
This error message indicates a defective dial-up connection. Please delete the old connection and create a new connection in accordance with our instructions to correct this error. Note: If you use a router, then delete the old dial up connection and then follow the instructions of the manufacturer of the router on which you want to connect. Nothing needs to be more dial-up connection.
629 The port was disconnected by the remote computer
This error indicates a wrong, faulty or missing device driver. Please check with a DSL or cable connection, the multi-driver of your network card and install this driver. If this is not successful, please create a new manual based on our dial-up connection. Use the other hand, an analog or ISDN modem, install the driver.
630 The port was disconnected due to hardware failure
This error message indicates a DSL or cable connection Multi attention to a mistake on the connection of your modem to the computer. Please check your network card or the USB port in the Device Manager tab and then these devices. Install the new drivers for it if this did not lead to success. Use the other hand, an analog or ISDN modem, install the drivers for this device and check that the manufacturer’s instructions accordingly, the correct modem is selected.
645 An internal authentication error has occurred
This error message indicates either a defective dial network or a foreign dialer software as the cause. Scan your computer for dialers and remove any software from other vendors. Does this in older operating systems like Windows ME (or older) are not successful, reinstall the Dial-Up Networking.
651 The modem has reported an error
The error can occur with undetected problems with the analog or ISDN modem connection device. Occurs this error even after a reboot, install the drivers for your devices.
676 The phone line is busy
Try this error, whether your phone line is busy. If necessary, check the wiring of your analog or ISDN modem, and used in the dial-up number. Use clear, however a DSL or cable connection the old multi dial-up connection and create the basis of our guidance a new connection.
678 There is no answer
This error message can have a DSL or cable connection multi several causes. Please first remove the power cord from your modem out for a minute from the outlet. During such a period no lamp lights on the modem. After connecting the power back, wait another minute. If this is not successful, please check your network card or the USB port in the Device Manager tab and then these devices. Install the drivers for this otherwise new. Use the other hand, an analog or ISDN modem, install the drivers for this device and check the established number.
680 There is no dial tone
Get this error on your DSL or multi-cable connection, please install Internet access via the NetCologne CD or manually in accordance with our instructions. Use the other hand, an analog or ISDN modem, check the wiring and the phone number that dials your modem. Check the “wait for dial tone before dialing” in your modem properties under the point Amtholung the point and turn it off.
691 Access was denied
This error message indicates directly on your user name and password attributes as the cause. Please check your entry on the basis of information provided by you NetCologne access. Pay attention also to the case-sensitive. With a DSL or cable connection, the multi-additive netcologne.de @ ‘in your user name needed if you do not use the software NetCologne.
692 Hardware failure in port or attached device
This error message indicates a DSL or cable connection multi indicate a failure of connecting your modem to your computer. Please check your network card or the USB port in the Device Manager tab and then these devices. Install the new drivers for it if this did not lead to success. Use the other hand, an analog or ISDN modem, install the drivers for this device.
718 PPP timeout
For this error the cause is often not accurately identified. Restart your computer and reset all connected devices. If the error persists, try using our guide a new dial-up connection.
720 No PPP control protocols configured
This error can occur if the TCP / IP protocol has been separated from the dial-up adapter or by loading a second WAN Miniport IP device driver creates a conflict. Uninstall the TCP / IP protocol, remove the second WAN Miniport IP device and then install the TCP / IP protocol to resolve this problem.
756 The connection is already selected
Restart your computer with this error first. If the error persists, check that your computer performs automatically each time a dial-up. This can be below the point Startup ‘under’ Start ‘and related programs. ” If that fails to succeed, please check your computer for viruses, Trojans and dialers.
769 The goal is not reached
This error can occur with a DSL or multi-cable connection, if the network card was not properly installed or disabled. Please check in Device Manager to see if your network card is enabled or install it again. Use the other hand, an analog or ISDN modem, install the drivers for this device and check that the manufacturer’s instructions accordingly, the correct modem is selected.
The author of this article has developed this knowledge of the problems that arise when using dial-up Internet, through his time spent working with 1-2-Free a free provider of dial up Internet in the UK.
Article Source: http://EzineArticles.com/?expert=Andrew_Seaman
http://EzineArticles.com/?Typical-Dial-Up-Error-Codes-and-Their-Solutions&id=5263601
Cheap Dial Up Internet Options?
You can compare Cheap Dial-Up Internet options and choose the Cheapest Dial-Up Internet plan that you’ll be satisfied with at ISP1.US
http://isp1.us